Activated carbon filters FC

Activated carbon filters FC

Activated carbon filters type Selip FC are realized in fiberglass FRP.

Calculation

Calculation of filters is realized according to European regulation EN 13121-3.

In alternative Selip can dimension these filters according to all the international standards that incorporate fiberglass FRP particularly the most common are:
BS 4994 – 1997,
AD 2000 Merkblatt-N1,
ASME Sez.X
ASME RTP-1.

Geometries

Sand filters have top and bottom dished

Standard working pressure varies from 1,5 to 3,0 to 5,0 bar

Hydraulic test pressure varies from 2,2 to 7,5 bar

Flows varies from 8 to 360 m³/h

Standard diameters are Ø 1000, 1200, 1500, 1800, 2000, 2500, 3000, 4000 mm.

Upon request can be realized diameters lower than 1000 mm, as Ø 400, Ø 500, Ø 600, Ø 700, Ø 800 mm.

Height of the legs varies depending on the Ø:
- H = 300 mm from Ø 800 to 1800 mm
- H = 350 mm from Ø 2000 to 3000 mm

Support

Legs are in fiberglass FRP fixed to the cylinder

Applications

Sand filters FS are used in the following sectors :
- Water treatment plants
- Filtering plants
- Seawater treatment plants

Usage

Water to be treated enters at the top onside of filter and is directed to the diffuser.
The water flows through the sand bed and is filtered.
Nozzles with suitable slots water flow determine the desired flow rate.
Max. working pressure is determined on max. flow provided by the pump input on end customer.
Filtered water is directed in the FRP fiberglass distributor ( or in the plate) and oriented in the bottom of the filter.
Manholes supplied are used for sand inlet and outlet and for normal maintenance operation

Standard accessories applied are :
- “n” flanged nozzles
- “n” manholes
- FRP internal distributor
- FRP plate nozzles holder
- Optional : PVC distributor nozzles holder, sand, quartzite and nozzles

Certifications

- Filters are exempted from CE marking, for non-hazardous products treatment ( seawater) with max. design pressure until 10 bar.
- Selip self-certification and homologation according to directive 97/23/CE (PED) is available for pressure filters dealing with non-hazardous products.
- Homologation issued by third party according to directive 97/23/CE (PED) for pressure fil.

Find here FRP Filters, Fiber Reinforced Plastic Filters manufacturers, suppliers & exporters in Italy. Get contact details & address of companies manufacturing.

Since 1961 we have been producing FRP Filters for water treatment, we have specialized in producing bobbin wound filters with radial and polar windings.

SELIP designs and manufactures GRP - FRP Filters of any diameter and length, pressure and temperature, according to customer's drawings.

Fibreglass reinforced plastic (FRP) vertical filter housings.

SELIP manufactures GRP Horizontal filters from 1.000mm up to diameters 4.000 mm.

SELIP manufactures GRP Vertical filters from 1.000mm up to diameters 4.000 mm.

FRP Filters offered to provide functionality as high-quality Filters and find application in varied processing industries as well as in commercial sectors.

SELIP Vertical or Horizontal Filters Series FS are constructed of Fiberglass Reinforced Isophthalic or Vinylester Resin.

We also offers a full range of fiberglass reinforced polyester (FRP) cartridge filter housings.