The chimneys FRP Selip are made of two different construction types
Selip type FW (filament winding frame)
Built using the system for mechanical reinforcement type FILAMENT WINDING.
The fireplace is not self-supporting, but it needs external support.
This solution is appropriate, ranging in diameter from 1 meter to max. 4 meters.
For larger diameters the excessive cost of transportation makes it uncompetitive this technical solution.
The fireplace Selip can be designed and manufactured according to the needs of each individual project.
- Solution 1 - F (flange) With metal tower or inside a tube in existing concrete.In this case it is necessary to set down the whole chimney on the lower block, and provide for flanged sections, with reference guides at various levels.
- Solution 2 - S (solder joint) Always with metal trestle or inside a tube in existing concrete.If the flanges can not be achieved for reasons of space during assembly, in this case it is always necessary to place around the chimney on the lower base, and provision of the sections welded, with reference guides at various levels.
- Solution 3 - B (spigot) With new support truss.In this case it is possible to provide sections with vertical joint cup-shaped, supported from above and guided from below.
Process and size
Selip S.p.A. is not a process' engineering company so does not develop the whole part on the size of the scrubber and makes no warranties to that effect.
Selip S.p.A. is able to develop the technical and commercial offer and then the final design, we start from a preliminary design to be provided by the customer.